Ad
related to: 1 square feet to ft cubed to meters height measure download
Search results
Results From The WOW.Com Content Network
{{convert|123|cuyd|m3+board feet}} → 123 cubic yards (94 m 3; 40,000 board feet) The following converts a pressure to four output units. The precision is 1 (1 decimal place), and units are abbreviated and linked.
1.0 cu yd (0.76 m 3) cubic foot: cuft (ft3, cufoot, foot3) cu ft long code "cufoot or foot3" outputs cubic foot (and never feet) 1.0 cu ft (0.028 m 3) board foot: board feet (board foot) (none) 1 ft × 1 ft × 1 in. used for measuring lumber long code "board foot" outputs board foot (and never feet) 1.0 board foot (0.0024 m 3) cubic inch: cuin ...
This volume measurement was developed to estimate what volume of a round log would be usable timber after processing, in effect attempting to ‘square’ the log and allow for waste. The hoppus ton (HT) was also a traditionally used unit of volume in British forestry. One hoppus ton is equal to 50 hoppus feet or 1.8027 cubic meters.
An American football field, including both end zones, is 360 by 160 ft (120.0 by 53.3 yd; 109.7 by 48.8 m), or 57,600 square feet (5,350 m 2) (0.535 hectares or 1.32 acres). A Canadian football field is 65 yards (59 m) wide and 110 yards (100 m) long with end zones adding a combined 40 yards (37 m) to the length, making it 87,750 square feet ...
The template is intended for conversion of heights specified in either metres or in feet and inches. Template parameters Parameter Description Type Status Metres m metre metres meter meters The height in metres. Do not use if feet and inches are specified. Number optional Centimetres cm centimetre centimetres centimeter centimeters The height in centimetres. Do not use if feet and inches are ...
A face cord is an informal measurement for stacked firewood, [1] sometimes called a rick. [2] Width and height is typically the same as a cord (3.6 m 3), but the depth can vary. [3] The front face is the same as a cord 4 by 8 feet (1.2 by 2.4 m), hence the name. The depth is generally 16 inches (410 mm) (for use in residential fireplaces) but ...
The IEEE symbol for the cubic foot per second is ft 3 /s. [1] The following other abbreviations are also sometimes used: ft 3 /sec; cu ft/s; cfs or CFS; cusec; second-feet; The flow or discharge of rivers, i.e., the volume of water passing a location per unit of time, is commonly expressed in units of cubic feet per second or cubic metres per second.
The solar flux unit is a unit of spectral irradiance equal to 10 −22 W⋅m −2 ⋅Hz −1 (100 yW⋅m −2 ⋅Hz −1). The nox (nx) is a unit of illuminance equal to 1 millilux (1 mlx). The nit (nt) is a unit of luminance equal to one candela per metre squared (1 cd⋅m −2). The lambert (L) is a unit of luminance equal to 10 4 /π cd⋅m ...