Search results
Results From The WOW.Com Content Network
The Turbo-Hydramatic or Turbo Hydra-Matic (THM) series was developed to replace both the original Hydra-Matic models and the Buick Dynaflow. In its original incarnation as the Turbo-Hydramatic 400, it was first used in the 1964 model year in Cadillacs. The Buick version, which followed shortly thereafter, was known as the Super-Turbine 400.
The TH400 was phased out for the 1980 models, when the A-727 replaced the TH-400 as the only automatic transmission option for both the SJ Wagoneer/Cherokee wagons and the J-10/J-20 trucks. Internally similar to the Chrysler A-727, the case was one-piece, cast with an AMC pattern bellhousing (not interchangeable with a Chrysler pattern A-727).
Until the patent for turbo codes expired, [1] the patent-free status of LDPC codes was an important factor in LDPC's continued relevance. [2] The name "turbo code" arose from the feedback loop used during normal turbo code decoding, which was analogized to the exhaust feedback used for engine turbocharging.
The 4L80-E uses two shift solenoids, initially called Shift Solenoid A and Shift Solenoid B; they were later changed to comply with OBD-II regulations to 1-2 shift solenoid and 2-3 shift solenoid. By activating and deactivating the solenoids in a predetermined pattern by the PCM, four distinct gear ratios can be achieved.
Rated up to 23.5 kg⋅m (230 N⋅m; 170 lbf⋅ft) while having a dry weight of 79.9 kg (176.1 lb). It is contracted by Chrysler Group LLC for use in 2013–2016 Dodge Dart and 2014-2016 Jeep Compass and Jeep Patriot, the transmission is designed to be maintenance-free under normal use and is assembled in South Korea.
The "MN4" 4T40E is able to handle vehicles up to 4000 lb (1814 kg) GVWR. The final drive ratio can vary depending on the car's curb weight and engine power output. 3.91, 3.63, 3.29, 3.05, 3.69, and 3.42 are all of the available ratios used in the 4T40 (and 4T45) transmission; Made possible by using combinations selected from 3 different sprocket combinations (32/38, 35/35, 33/37) and 2 ...
This transmission was released in 1988 for use in the Subaru XT6 and Leone Touring Wagon. The bellhousing and input shaft were changed for the Subaru EJ engine, the first was used until about 1998, when a major redesign of the holding devices was released.
Transmission broadcast codes in 2005 for the ECCC transmission are 5ABN and 5MMN. [1] The 4T80-E is a hydramatic transmission and was developed for use with V8 front-wheel-drive cars, and at the time exclusively the Cadillac Northstar engine. [3] It was designed with extreme power handling capabilities at the time.