Ads
related to: uhf circulator signal processing
Search results
Results From The WOW.Com Content Network
ANSI and IEC standard schematic symbol for a circulator (with each waveguide or transmission line port drawn as a single line, rather than as a pair of conductors). In electrical engineering, a circulator is a passive, non-reciprocal three- or four-port device that only allows a microwave or radio-frequency (RF) signal to exit through the port directly after the one it entered.
Frequency mixer symbol. In electronics, a mixer, or frequency mixer, is an electrical circuit that creates new frequencies from two signals applied to it.In its most common application, two signals are applied to a mixer, and it produces new signals at the sum and difference of the original frequencies.
Ultra high frequency (UHF) is the ITU designation [1] [2] for radio frequencies in the range between 300 megahertz (MHz) and 3 gigahertz (GHz), also known as the decimetre band as the wavelengths range from one meter to one tenth of a meter (one decimeter).
An active circulator can be constructed using one of several different technologies. One early technology is the use of transistors as the active devices to perform the non-reciprocal function. [1] Varactor circuits are another technology, relying on a time-varying transmission line structure, driven by a separate pump signal. [2]
The main disadvantage of the technique is the requirement for more signal processing. Because the "movement" in Pseudo-Doppler proceeds in steps, the resulting signal is not as smooth as it is in the case of a moving antenna. This results in a signal with considerable number of sidebands that have to be filtered out.
Pulse compression is a signal processing technique commonly used by radar, sonar and echography to either increase the range resolution when pulse length is constrained or increase the signal to noise ratio when the peak power and the bandwidth (or equivalently range resolution) of the transmitted signal are constrained.
The intermediate frequency is created by mixing the carrier signal with a local oscillator signal in a process called heterodyning, resulting in a signal at the difference or beat frequency. Intermediate frequencies are used in superheterodyne radio receivers , in which an incoming signal is shifted to an IF for amplification before final ...
It is usually associated with CCIR System G for UHF broadcasts. System B was the first internationally accepted 625-line broadcasting standard in the world. A first 625-line system with a 8 MHz channel bandwidth was proposed at the CCIR Conference in Stockholm in July 1948 (based on 1946-48 studies in the Soviet Union [ 6 ] by Mark Krivosheev ...
Ad
related to: uhf circulator signal processing