Ads
related to: 315 80r22.5 tire dimensions cm size
Search results
Results From The WOW.Com Content Network
There is the rare exception of metric-diameter tires, such as the use of the 390 size, which in this case would indicate a rim of 390 mm in diameter. Few tires are made to this size currently. The number may be longer where a half-inch size is used, for example many heavy transport trucks now use 22.5-inch tires. [7] [8]
Modern road tires have several measurements associated with their size as specified by tire codes like 225/70R14. The first number in the code (e.g., "225") represents the nominal tire width in millimeters. This is followed by the aspect ratio (e.g.,"70"), which is the height of the sidewall expressed as a percentage of the nominal tire width.
ISO 5775 is an international standard for labeling the size of bicycle tires and rims. The system used was originally developed by the European Tyre and Rim Technical Organisation (ETRTO). It is designed to make tire sizing consistent and clear. It replaces overlapping informal systems that ambiguously distinguished between sizes.
ETRTO sizes apply to rims and tyres for vehicles of all types, including bicycles. The great advantage of ETRTO sizing is that it is unambiguous; previously, nominal dimensions were used which were interpreted in different ways by different countries and manufacturers - a problem for the end user.
For example, if a fat-bike tire is inflated to 0.5 bar (50 kPa; 7.3 psi) gauge pressure at room temperature 20 °C (68 °F) and then the temperature is decreased to −10 °C (14 °F) (a 9% decrease in absolute temperature), the absolute pressure of 1.5 bar (150 kPa; 22 psi) will be decreased by 9% to 1.35 bar (135 kPa; 19.6 psi), which ...
The Michelin TRX, (and the related TDX), is a radial tire introduced by the Michelin Group in 1975. It is one of the first volume-produced low-profile tires. Although technologically advanced, and reasonably successful, the tire's requirement for a non-standard rim ultimately condemned it to a relatively short commercial life.
The first production slick tyre was developed by M&H Tires in the early 1950s for use in drag racing. By eliminating any grooves cut into the tread, such tyres provide the largest possible contact patch to the road, [ 5 ] and maximize dry traction for any given tyre dimension.
Traditionally, there were four different sizes of 28-inch diameter wheels, from the narrow tires to the widest, they all measured the same outside diameter, which coincide with four different families of 700 tire sizes, these are 700, 700A, 700B and 700C. The largest of these rims (ISO 647mm/642mm) with the narrower tires are no longer available.