Search results
Results From The WOW.Com Content Network
For example, 4% electrical steel has an initial relative permeability (at or near 0 T) of 2,000 and a maximum of 38,000 at T = 1 [5] [6] and different range of values at different percent of Si and manufacturing process, and, indeed, the relative permeability of any material at a sufficiently high field strength trends toward 1 (at magnetic ...
Magnetic field (green) created by a current-carrying winding (red) in a typical magnetic core transformer or inductor, with the iron core C forming a closed loop, possibly with air gaps G in it. The drawing shows a section through the core. The purpose of the core is to provide a closed high permeability path for the magnetic field lines.
Strip of permalloy. Permalloy is a nickel–iron magnetic alloy, with about 80% nickel and 20% iron content.Invented in 1914 by physicist Gustav Elmen at Bell Telephone Laboratories, [1] it is notable for its very high magnetic permeability, which makes it useful as a magnetic core material in electrical and electronic equipment, and also in magnetic shielding to block magnetic fields.
Each layer is about 5 mm thick. It reduces the effect of the Earth's magnetic field inside by a factor of 1500. Mu-metal is a nickel–iron soft ferromagnetic alloy with very high permeability, which is used for shielding sensitive electronic equipment against static or low-frequency magnetic fields.
By choosing a magnetic material with a high (BH) max, and also choosing the aspect ratio of the magnet so that its −BH is equal to (BH) max, the required volume of magnet to achieve a target flux density in the air gap is minimized. This expression assumes that the permeability in the core that is connecting the magnetic material to the air ...
Ferromagnetism is a property of certain materials (such as iron) that results in a significant, observable magnetic permeability, and in many cases, a significant magnetic coercivity, allowing the material to form a permanent magnet. Ferromagnetic materials are noticeably attracted to a magnet, which is a consequence of their substantial ...
Sendust composition is typically 85% iron, 9% silicon and 6% aluminium. The powder is sintered into cores to manufacture inductors. Sendust cores have high magnetic permeability (up to 140 000) [ clarification needed ] , low loss, low coercivity (5 A/m) good temperature stability and saturation flux density up to 1 T [ clarification needed ] .
It is a measure of material permeability variation after demagnetization, given by a formula = (), where , are permeability values, and t 1, t 2 are time from demagnetization; usually determined for t 1 = 10 min, t 2 = 100 min; range from 2×10 −6 to 12×10 −6 for typical MnZn and NiZn ferrites;